Obiekt
Tytuł: Application of buckling restrained braces to upgrade vertical stiffness of existing RC frames
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
In this paper, based on the RC frame structure of an industrial building, the finite element model of the structure is developed, according to the Chinese code for seismic design of buildings [9]. Considering the lack of seismic performance, the buckling restrained brace (BRB) is adopted for seismic retrofitting, and various configurations of buckling restrained support are considered for reinforcement. ; The elastic response spectrum analysis (RSA) and direct integration nonlinear time history analyses (NL-TH) are carried out for the frame structure before and after reinforcement using ETABS finite element software. From the joints displacement, inter-story displacement, inter-story shear force, acceleration, energy dissipation, and other aspects of the seismic response of the strengthened structure and the non-strengthened structure, the comparison has been made. ; The effect of buckling restrained support and common support on the existing building structure is verified through analytical modeling. After reinforcement, there is a 40%, 39.3%, 40%, 36.4%, and 38.3% reduction in the first period of vibration after the building is strengthened by inverted BRB, V BRB, two-story BRB, single BRB, and ordinary steel braces, respectively. Strengthening of the structure by buckling restrained braces and ordinary steel braces both decrease the original building displacement by more than 50% from the first to the fourth floor. ; Under severe earthquakes, the use of BRB reduced the column shear by 46.6%; similarly, the incorporation of ordinary steel braces reduced the column shear by 4.72%. It is concluded that using buckling restrained braces will increase the vertical stiffness of the structure to a very high extent.
Opis:
tytuł dodatkowy: Prace z Inżynierii Lądowej i Środowiska
Wydawca:
Zielona Góra: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
Civil and Environmental Engineering Reports (CEER), no 30, vol. 3
Jezyk:
Licencja CC BY-NC-ND 3.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Repozytorium > Jednostki organizacyjne > Wydział Budownictwa, Architektury i Inżynierii Środowiska
- Repozytorium > Typy utworów > Artykuły
- Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > Civil and Environmental Engineering Reports (CEER) > Civil and Environmental Engineering Reports (CEER) (2020)
Data ostatniej modyfikacji:
2023-03-23
Data dodania obiektu:
2023-03-23
Liczba wyświetleń treści obiektu:
46
Wszystkie dostępne wersje tego obiektu:
https://zbc.uz.zgora.pl/repozytorium/publication/79592
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
Civil and Environmental Engineering Reports (CEER)
-
Civil and Environmental Engineering Reports (CEER), no 33 (2023)
-
Civil and Environmental Engineering Reports (CEER), no 32 (2022)
-
Civil and Environmental Engineering Reports (CEER), no 31 (2021)
-
Civil and Environmental Engineering Reports (CEER), no 30 (2020)
-
Civil and Environmental Engineering Reports (CEER), no 30, vol. 1 (2020)
-
Civil and Environmental Engineering Reports (CEER), no 30, vol. 2 (2020)
-
Civil and Environmental Engineering Reports (CEER), no 30, vol. 3 (2020)
- Horticultural therapy in greenery design. Example of the "Światło" hospice in Toruń
- Evaluation of steel frame structures with the response of seismic isolators
- Development of cost estimation models based on ANN ensembles and the SVM method
- Application of buckling restrained braces to upgrade vertical stiffness of existing RC frames
- Elaboration of an expert system for sizing, designing and verifying flexible pavements
- Sustainable development of urban spaces towards climate protection and adaptation to its changes
- Performance evaluation of the base isolation technique on the blast mitigation of spatial structures
- Impact of elevated temperature on the properties of concretes reinforced with Alfa fiber
- Effects of steel fibres on fresh and hardened properties of cement concrete
- Physical characterization and durability of blended cements based on brick powder
- Stability of anchored retaining walls under seismic loading conditions to obtain minimal anchor lengths using the improved failure model
- Contribution to the study of soil stabilized by ballast columns
- Identification of biogenic sulphate corrosion of concrete in sewage treatment plant settling tank walls
- Analytical study on the behaviour of composite space truss structures with openings in a concrete slab
- Measurement of straightness and verticality of sheet piling
-
Civil and Environmental Engineering Reports (CEER), no 30, vol. 4 (2020)
-
Civil and Environmental Engineering Reports (CEER), no 30, vol. 1 (2020)
-
Civil and Environmental Engineering Reports (CEER), no 29 (2019)
-
Civil and Environmental Engineering Reports (CEER), no 28 (2018)
-
Civil and Environmental Engineering Reports (CEER), no 27 (2017)
-
Civil and Environmental Engineering Reports (CEER), no 26 (2017)
-
Civil and Environmental Engineering Reports (CEER), no 25 (2017)
-
Civil and Environmental Engineering Reports (CEER), no 24 (2017)
-
Civil and Environmental Engineering Reports (CEER), no 23 (2016)
-
Civil and Environmental Engineering Reports (CEER), no 22 (2016)
-
Civil and Environmental Engineering Reports (CEER), no 21 (2016)
-
Civil and Environmental Engineering Reports (CEER), no 20 (2016)
-
Civil and Environmental Engineering Reports (CEER), no 19 (2015)
-
Civil and Environmental Engineering Reports (CEER), no 18 (2015)
-
Civil and Environmental Engineering Reports (CEER), no 17 (2015)
-
Civil and Environmental Engineering Reports (CEER), no 16 (2015)
-
Civil and Environmental Engineering Reports (CEER), no 15 (2014)
-
Civil and Environmental Engineering Reports (CEER), no 14 (2014)
-
Civil and Environmental Engineering Reports (CEER), no 13 (2014)
-
Civil and Environmental Engineering Reports (CEER), no 12 (2014)
-
Civil and Environmental Engineering Reports (CEER), no 11 (2013)
-
Civil and Environmental Engineering Reports (CEER), no 10 (2013)
-
Civil and Environmental Engineering Reports (CEER), no 9 (2012)
-
Civil and Environmental Engineering Reports (CEER), no 8 (2012)
-
Civil and Environmental Engineering Reports (CEER), no 7 (2011)
-
Civil and Environmental Engineering Reports (CEER), no 6 (2011)
-
Civil and Environmental Engineering Reports (CEER), no 5 (2010)
-
Civil and Environmental Engineering Reports (CEER), no 4 (2010)
-
Civil and Environmental Engineering Reports (CEER), no 3 (2009)
-
Civil and Environmental Engineering Reports (CEER), no 2 (2007)
-
Civil and Environmental Engineering Reports (CEER), no 1 (2005)
-
Civil and Environmental Engineering Reports (CEER), no 33 (2023)
| Nazwa wydania | Data |
|---|---|
| Application of buckling restrained braces to upgrade vertical stiffness of existing RC frames | 2023-03-23 |
