Obiekt
Tytuł: Thermal efficiency analysis of the rotary kiln based on the wear of the lining
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
The thickness of the lining is reduced from 230 mm to 80 mm due to long-term wear, resulting in low thermal efficiency of the rotary kiln. The thermal resistance, which is positively correlated with the thickness of the lining, is one of the most important factors determining the thermal efficiency of the rotary kiln. The thermal efficiency of the rotary kiln can be improved by introducing insulation material with lower thermal conductivity into the lining. ; The average heat flux is used as the thermal efficiency evaluation index of the 4×60 m rotary kiln under no-load conditions in this work. A numerical experiment was conducted for the temperature and heat flux of the inner surface of the lining, as well as the temperature of the outer surface of the shell during the wear of the lining. There are two cases considered, one with and one without insulation materials in lining. ; According to the analysis, when the lining in the high temperature zone of the rotary kiln wears to 80 mm, the average heat flux of the inner surface of the lining increases by 105.03%. However, after the addition of insulation material, the average heat flux on the inner surface of the lining increases by 40.38% (wears to 80 mm). Compared to the thermal efficiency of the rotary kiln without heat insulation material, the average heat flux of the inner surface of the lining is reduced by 36.36% (230 mm), and it is reduced by 99.01% (wears to 80 mm). ; A significant advantage of this solution is that it can increase the thermal efficiency of the rotary kiln, improve the insulation performance of the lining, reduce heat loss to the environment through the shell, and the results obtained can be used for the latest equipment design and existing equipment improvements.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 28, number 2 (2023)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Repozytorium > Typy utworów > Artykuły
- Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME)
- Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2023)
Data ostatniej modyfikacji:
2023-07-10
Data dodania obiektu:
2023-07-10
Liczba wyświetleń treści obiektu:
197
Wszystkie dostępne wersje tego obiektu:
https://zbc.uz.zgora.pl/repozytorium/publication/82344
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 1 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 2 (2023)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 2 (2023) - Contents
- Shear strength characteristics of weathered jointed Kenny Hill interbedded formation for cylindrical specimen under direct shear test
- The impact of additives applied to the lubricant on the burnishing process and tribological properties
- Comparison of the post-tensioned, solid, hollow block, and flat slabs in terms of economy considering different span lengths
- Computational scheme for a differential - difference equation with a large delay in convection term
- Lubrication of asymmetric rollers considering viscosity as function of mean temperature
- Impacts of chemical reactions on inclined isothermal vertical plate
- Numerical study of a transient MHD flow across an oscillating vertical plate with thermal radiation and viscous dissipation
- An unsteady electro-magnetohydrodynamic two-liquid plasma flow along a channel of insulating porous plates with hall currents
- Research on low density polyethylene (LDPE), recycled by advanced thermal analysis (DSC, TG)
- Thermal efficiency analysis of the rotary kiln based on the wear of the lining
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 3 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 4 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 1 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
| Nazwa wydania | Data |
|---|---|
| Thermal efficiency analysis of the rotary kiln based on the wear of the lining | 2023-07-10 |
