Obiekt
Tytuł: Modeling and optimization of cutting parameters when turning EN-AW-1350 aluminum alloy
Autor:
Khrouf, F. ; Tebassi, Hamid ; Yallese, M.A. ; Chaoui, Kamel ; Haddad, A.
Data wydania:
Typ zasobu:
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
An experimental investigation is carried out to examine the effects of various cutting parameters on the response criteria when turning EN-AW-1350 aluminum alloy under dry cutting conditions. The experiments related to the analysis of the influence of turning parameters on the surface roughness (Ra) and material removal rate (MRR) were carried out according to the Taguchi L27 orthogonal array approach. ; The analysis of variance (ANOVA) was applied to characterizing the main elements affecting response parameters. Finally, the desirability function (DP) was applied for a bi-objective optimization of the machining parameters with the objective of achieving a better surface finish (Ra) and a higher productivity (MRR). ; The results showed that the cutting speed is the most dominant factor affecting Ra followed by the feed rate and the depth of cut. Moreover, the Artificial Neural Network (ANN) approach is found to be more reliable and accurate than its Response Surface methodology (RSM) counterpart in terms of predicting and detecting the non-linearity of the surface roughness and material removal rate mathematical models. ; ANN provided prediction models with a precision benefit of 8.21% more than those determined by RSM. The latter is easier to use, and provides more information than ANN in terms of the impacts and contributions of the model terms.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 27, number 2 (2022)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Repozytorium > Typy utworów > Artykuły
- Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME)
- Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2022)
Data ostatniej modyfikacji:
2023-10-30
Data dodania obiektu:
2023-02-03
Liczba wyświetleń treści obiektu:
101
Wszystkie dostępne wersje tego obiektu:
https://zbc.uz.zgora.pl/repozytorium/publication/77385
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 1 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 2 (2022)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 2 (2022) - Contents
- Influence of slip parameter, viscous dissipationand joule heating effect on boundary layer flow and heat transfer over a power-law stretching wedge-shaped surface with the correlation coefficient and multiple regressions
- Heat transfer by natural convection from a heated square inner cylinder to its elliptical outer enclosure utilizing nanofluids
- Analysis of deflection in visco-thermoelastic beam resonators subjected to harmonic loading
- Reflection and transmission in non-local couple stress micropolar thermoelastic media
- Heat transfer in oscillating flow through porous medium with dissipative heat
- Effect of the inner diameter and Reynolds number on the recirculation zone in annular jet flow
- A study of mhd fluid with second order slip and thermal flow over a nonlinear stretching sheet
- Comparison of the results for calculation of vortex currents after sudden expansion of the pipe with different diameters
- Modeling and optimization of cutting parameters when turning EN-AW-1350 aluminum alloy
- Promising wing vibration measurement system using MEMS IMUS and Kalman filter correction
- Combined effects of helical force and rotation on stationary convection of a binary ferrofluid in a porous medium
- On a couple-stress Rivlin-Ericksen ferromagnetic fluid heated from below with varying gravity, rotation, magnetic field and suspended particles flowing through a porous medium
- Numerical study on thermal performance of water flow in a twisted duct heat exchanger
- Influence of welding parameters of resistance spot welding on joining aluminum with copper
- Chemical reaction and MHD flow for magnetic field effect on heat and mass transfer of fluid flow through a porous medium onto a moving vertical plate
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 3 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 4 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 1 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
| Nazwa wydania | Data |
|---|---|
| Modeling and optimization of cutting parameters when turning EN-AW-1350 aluminum alloy | 2023-10-30 |
