Obiekt
Tytuł: Shapes of an air taylor bubble in stagnant liquids influenced by different surface tensions
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
The aim of this work is to propose an empirical model for predicting shapes of a Taylor bubble, which is a part of slug flows, under different values of the surface tension in stagnant liquids by employing numerical simulations. The k - ? turbulence model was used in the framework of finite volume method for simulating flow fields in a unit of slug flow and also the pressure distribution on a Taylor bubble surface. ; Assuming that an air pressure distribution inside the Taylor bubble must be uniform, a grid search method was exploited to find an appropriate shape of a Taylor bubble for six values of surface tension. It was found that the shape of a Taylor bubble would be blunter if the surface tension was increased. This was because the surface tension affected the Froude number, controlling the flow around a Taylor bubble. The simulation results were also compared with the Taylor bubble shape, created by the Dumitrescu-and-Taylor model and former studies in order to ensure that they were consistent. Finally, the empirical model was presented from the simulation results.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 23, number 1 (2018)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Repozytorium > Typy utworów > Artykuły
- Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2018)
Data ostatniej modyfikacji:
2023-07-06
Data dodania obiektu:
2023-03-31
Liczba wyświetleń treści obiektu:
71
Wszystkie dostępne wersje tego obiektu:
https://zbc.uz.zgora.pl/repozytorium/publication/80051
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23, number 1 (2018)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 23, number 1 (2018) - Contents
- Two-dimensional deformation in a thermoelastic solid with microtemperatures subjected to an internal heat source
- Modelling of the flow of streams of cohesionless and cohesive bulk materials in a conveyor discharge point with a flat conveyor belt
- Experimental and numerical analysis of fracture in 41Cr4 steel - issues of the stationary cracks
- Stability assessment as a criterion of stabilization of the movement trajectory of mobile crane working elements
- Shapes of an air taylor bubble in stagnant liquids influenced by different surface tensions
- Compressible analysis of Bénard Convection of magneto rotatory couple-stress fluid
- Modelling of the human knee joint supported by active orthosis
- Effect of seepage on change in stress distribution scenario in static and seismic behaviour of earthen dams
- Effects of heat source/sink and chemical reaction on MHD maxwell nanofluid flow over a convectively heated exponentially stretching sheet using homotopy analysis method
- Simulation of the flow through porous layers composed of converging-diverging capillary fissures or tubes
- Flows of newtonian and power-law fluids in symmetrically corrugated cappilary fissures and tubes
- The effect of multigrid parameters in a 3D heat diffusion equation
- Identification of the cause of the stem neck fracture in the hip joint endoprosthesis
- Durability tests of ball valve prototype with flowmeter operation
- Selected aspects of cryogenic tank fatigue calculations for offshore application
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23, number 2 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23, number 3 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23, number 4 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23, number 1 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
| Nazwa wydania | Data |
|---|---|
| Shapes of an air taylor bubble in stagnant liquids influenced by different surface tensions | 2023-07-06 |
