Obiekt
Tytuł: The Use of Phase Change Materials to Improve the External Walls` Thermal Parameters of Heated Buildings
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
Currently, it is estimated that the construction sector consumes over 40% of the energy produced and about 50% of the mass of processed materials. As a consequence, there is a challenge to look for alternative material solutions allowing for the storage and conversion of energy. Phase change materials give us such opportunities. Their introduction leads to additional benefits related to thermal parameters. ; The work presents a short overview of PCMs along with the possibility of their application. Then, as part of the research, the selected phase change material was applied to the internal plaster layer of an external wall to check its activity. The obtained results were compared to the values of reference samples (without PCM). The proposed solution leads to the improvement of the analyzed partitions` thermal parameters.
Opis:
tytuł dodatkowy: Prace z Inżynierii Lądowej i Środowiska
Wydawca:
Zielona Góra: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
Civil and Environmental Engineering Reports (CEER), no 33, vol. 4
Jezyk:
Licencja CC BY-NC-ND 3.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Repozytorium > Jednostki organizacyjne > Wydział Budownictwa, Architektury i Inżynierii Środowiska
- Repozytorium > Typy utworów > Artykuły
- Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > Civil and Environmental Engineering Reports (CEER) > Civil and Environmental Engineering Reports (CEER) (2023)
Data ostatniej modyfikacji:
2024-02-06
Data dodania obiektu:
2024-02-06
Liczba wyświetleń treści obiektu:
47
Wszystkie dostępne wersje tego obiektu:
https://zbc.uz.zgora.pl/repozytorium/publication/87011
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
Civil and Environmental Engineering Reports (CEER)
-
Civil and Environmental Engineering Reports (CEER), no 33 (2023)
-
Civil and Environmental Engineering Reports (CEER), no 33, vol. 1 (2023)
-
Civil and Environmental Engineering Reports (CEER), no 33, vol. 2 (2023)
-
Civil and Environmental Engineering Reports (CEER), no 33, vol. 3 (2023)
-
Civil and Environmental Engineering Reports (CEER), no 33, vol. 4 (2023)
- Treatment of Municipal Wastewater Using Electrocoagulation Process
- BIM Policy in Eastern Europe
- Multi-Criteria Analysis and Design Ideas of Green Façade Systems as Eco-Friendly Architectural Solutions
- Effect of temperature and Humidity on the Thermal Conductivity [lambda] of Insulation Materials
- Feeding a Membrane-less Microbial Fuel Cell by Mixed Municipal and Industrial Wastewater
- The Use of Phase Change Materials to Improve the External Walls` Thermal Parameters of Heated Buildings
- Improved of Mechanical Characteristics of Gargar Mud by Mineral Additives
- Effect of Using Various Cathode Materials (Carbon Felt, Ni-Co, Cu-B, and Cu-Ag) on the Operation of Microbial Fuel Cell
- Presence of MNPs in Water Environment-pathways of Degradation and Impact on Organisms
- Selection of Robot for Contour Crafting Using Analytical Hierarchy Process
-
Civil and Environmental Engineering Reports (CEER), no 33, vol. 1 (2023)
-
Civil and Environmental Engineering Reports (CEER), no 32 (2022)
-
Civil and Environmental Engineering Reports (CEER), no 31 (2021)
-
Civil and Environmental Engineering Reports (CEER), no 30 (2020)
-
Civil and Environmental Engineering Reports (CEER), no 29 (2019)
-
Civil and Environmental Engineering Reports (CEER), no 28 (2018)
-
Civil and Environmental Engineering Reports (CEER), no 27 (2017)
-
Civil and Environmental Engineering Reports (CEER), no 26 (2017)
-
Civil and Environmental Engineering Reports (CEER), no 25 (2017)
-
Civil and Environmental Engineering Reports (CEER), no 24 (2017)
-
Civil and Environmental Engineering Reports (CEER), no 23 (2016)
-
Civil and Environmental Engineering Reports (CEER), no 22 (2016)
-
Civil and Environmental Engineering Reports (CEER), no 21 (2016)
-
Civil and Environmental Engineering Reports (CEER), no 20 (2016)
-
Civil and Environmental Engineering Reports (CEER), no 19 (2015)
-
Civil and Environmental Engineering Reports (CEER), no 18 (2015)
-
Civil and Environmental Engineering Reports (CEER), no 17 (2015)
-
Civil and Environmental Engineering Reports (CEER), no 16 (2015)
-
Civil and Environmental Engineering Reports (CEER), no 15 (2014)
-
Civil and Environmental Engineering Reports (CEER), no 14 (2014)
-
Civil and Environmental Engineering Reports (CEER), no 13 (2014)
-
Civil and Environmental Engineering Reports (CEER), no 12 (2014)
-
Civil and Environmental Engineering Reports (CEER), no 11 (2013)
-
Civil and Environmental Engineering Reports (CEER), no 10 (2013)
-
Civil and Environmental Engineering Reports (CEER), no 9 (2012)
-
Civil and Environmental Engineering Reports (CEER), no 8 (2012)
-
Civil and Environmental Engineering Reports (CEER), no 7 (2011)
-
Civil and Environmental Engineering Reports (CEER), no 6 (2011)
-
Civil and Environmental Engineering Reports (CEER), no 5 (2010)
-
Civil and Environmental Engineering Reports (CEER), no 4 (2010)
-
Civil and Environmental Engineering Reports (CEER), no 3 (2009)
-
Civil and Environmental Engineering Reports (CEER), no 2 (2007)
-
Civil and Environmental Engineering Reports (CEER), no 1 (2005)
-
Civil and Environmental Engineering Reports (CEER), no 33 (2023)
| Nazwa wydania | Data |
|---|---|
| The Use of Phase Change Materials to Improve the External Walls` Thermal Parameters of Heated Buildings | 2024-02-06 |
