Obiekt
Tytuł: Performance analysis of the CDRI diesel engine`s performance and emission parameters blended with leftover cooking oil, additional nanoparticles, and hydrogen enrichment
Autor:
Dond, Dipak ; Barshikar, Raghavendra Rajendra ; Ghongade, Harshvardhan ; Bhadre, Anjali ; Dond, Shantaram
Data wydania:
Typ zasobu:
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
The low cost and wide availability of used cooking oil make it a desirable feedstock for the generation of biodiesel. In this study, Three distinct hydrogen enrichment values (4 lit/min, 6 lit/min, and 8 lit/min) and nanoparticle concentrations of 50, 100, and 150 PPM) are combined with used cooking oil blends (10%, 15%, and 20%) to evaluate the CRDI single-cylinder diesel engine`s efficiency and emission properties. ; Split injection technique was used in the experiments to investigate the impact on emissions and engine efficiency. The outcomes reveal a significant improvement in brake thermal efficiency over standard diesel fuel, up to 8%. In addition, a noteworthy decrease was noted in particular fuel consumption and emissions parameters, including smoke, hydrocarbons (HC), and carbon monoxide (CO), under all experimental setups. ; On the other hand, there was a minor rise in nitrogen oxide (NOx) emissions. With encouraging gains in performance and emissions characteristics, this study clarifies the feasibility of using used cooking oil blends with hydrogen nanoparticle enrichment as a sustainable alternative fuel for CRDI diesel engines. Increased environmental friendliness and overall efficiency could be achieved with this alternative fuel technology with additional refinement and optimization of engine operating parameters.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 30, number 1 (2025)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Typy utworów > Artykuły
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME)
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2025)
Data ostatniej modyfikacji:
2025-03-10
Data dodania obiektu:
2025-03-10
Liczba wyświetleń treści obiektu:
33
Wszystkie dostępne wersje tego obiektu:
https://zbc.uz.zgora.pl/publication/93065
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 30 (2025)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 30, number 1 (2025)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 30, number 1 (2025) - contents
- Eddy current loss behavior of hollow circular cylinder due to time-varying electromagnetic field
- The effect of mechanical properties on polymer deformation and flow suspension in the selective laser sintering process
- Kinematic analysis and synthesis of a compound epicyclic gear mechanism with intermeshing satellites
- Performance analysis of the CDRI diesel engine`s performance and emission parameters blended with leftover cooking oil, additional nanoparticles, and hydrogen enrichment
- Comparison of the mechanical properties of low-cost bio fiber reinforced polymer composites
- Investigation of stress concentration factors in countersunk holes of biaxially loaded isotropic plates
- Weight optimization of leaf spring assembly using design for manufacturing approach and FEM in graduated leaves for Electric Vehicle
- Evaluation of microstructure and mechanical properties resulting from gas nitriding process for different types of steel
- Complex dynamics of a heavy symmetrical gyroscope under a parametric nonlinear damping
- Analytical Investigation of TAR for Enhancing Performance Using Varied Stack configuration and Varied Working Fluid
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 30, number 1 (2025)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 30 (2025)
