Obiekt
Tytuł: Comparison of the mechanical properties of low-cost bio fiber reinforced polymer composites
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
In this study, the physical, and mechanical properties of low-cost and biocomposites were evaluated. The walnut shell and date palm frond fibers were thermally treated in an oven at a temperature of 70 [degrees] C and then chemically treated with NaOH and distilled water solution, after these treatments, the biofiber materials were thermally treated again at 50[degrees]C. ; Three types of biocomposite; walnut shell fiber reinforced polymer (WFRP), date palm fiber reinforced polymer (DFRP), and hybrid fiber reinforced polymer (HFRP), whereas the biocomposite sheets consisting of 30% biofibers and 70% of unsaturated polyester, the mechanical test specimens were cut by a CNC machine according to ASTM standards. ; The effect of fiber type was analyzed in terms of the mechanical properties (tensile, compression, and density). The tensile test results showed that the DFRP composite had the best results comparable with WFRP and HFRP composites, the ultimate tensile strength, was increased by 28.6% and 12.5% respectively, furthermore, the compression strength of the WFRP composite was increased by 21.5% and 10.3% compared with DFRP and HFRP composites respectively. The WFRP composite revealed the lowest value of density 4.60 g/cm3 rather than DFRP and HFRP composites.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 30, number 1 (2025)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Typy utworów > Artykuły
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME)
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2025)
Data ostatniej modyfikacji:
2025-03-10
Data dodania obiektu:
2025-03-10
Liczba wyświetleń treści obiektu:
11
Wszystkie dostępne wersje tego obiektu:
https://zbc.uz.zgora.pl/publication/93066
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 30 (2025)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 30, number 1 (2025)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 30, number 1 (2025) - contents
- Eddy current loss behavior of hollow circular cylinder due to time-varying electromagnetic field
- The effect of mechanical properties on polymer deformation and flow suspension in the selective laser sintering process
- Kinematic analysis and synthesis of a compound epicyclic gear mechanism with intermeshing satellites
- Performance analysis of the CDRI diesel engine`s performance and emission parameters blended with leftover cooking oil, additional nanoparticles, and hydrogen enrichment
- Comparison of the mechanical properties of low-cost bio fiber reinforced polymer composites
- Investigation of stress concentration factors in countersunk holes of biaxially loaded isotropic plates
- Weight optimization of leaf spring assembly using design for manufacturing approach and FEM in graduated leaves for Electric Vehicle
- Evaluation of microstructure and mechanical properties resulting from gas nitriding process for different types of steel
- Complex dynamics of a heavy symmetrical gyroscope under a parametric nonlinear damping
- Analytical Investigation of TAR for Enhancing Performance Using Varied Stack configuration and Varied Working Fluid
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 30, number 1 (2025)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 30 (2025)
| Nazwa wydania | Data |
|---|---|
| Comparison of the mechanical properties of low-cost bio fiber reinforced polymer composites | 2025-03-10 |
