Obiekt
Tytuł: FEM and experimental analysis of thin-walled composite elements under compression
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
Thin-walled steel elements in the form of openwork columns with variable geometrical parameters of holes were studied. The samples of thin-walled composite columns were modelled numerically. They were subjected to axial compression to examine their behavior in the critical and post-critical state. The numerical models were articulately supported on the upper and lower edges of the cross-section of the profiles. ; The numerical analysis was conducted only with respect to the non-linear stability of the structure. The FEM analysis was performed until the material achieved its yield stress. This was done to force the loss of stability by the structures. The numerical analysis was performed using the ABAQUS software. The numerical analysis was performed only for the elastic range to ensure the operating stability of the tested thin-walled structures.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 22, number 2 (2017)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Typy utworów > Artykuły
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME)
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2017)
Data ostatniej modyfikacji:
2023-07-06
Data dodania obiektu:
2023-04-05
Liczba wyświetleń treści obiektu:
97
Wszystkie dostępne wersje tego obiektu:
https://zbc.uz.zgora.pl/publication/80269
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22, number 1 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22, number 2 (2017)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 22, number 2 (2017) - spis treści
- Analytical solution of mixed boundary value problems using the displacement potential approach for the case of plane stress and plane strain conditions
- On some mechanical properties and wear behavior of sintered bronze based composites reinforced with some aluminides microadditives
- Effect of hall current in thermoelastic materials with double porosity structure
- Effect of relative velocity between rough surfaces: hydrodynamic lubrication of rotary lip seal
- Simulating progressive damage of notched composite laminates with various lamination schemes
- Exact solution of the harmonic problem for a rectangular plate in flat deformation by the method of initial functions
- Unsteady MHD mixed convection flow of a micropolar fluid over a vertical wedge
- FEM and experimental analysis of thin-walled composite elements under compression
- Transport of MHD couple stress fluid through peristalsis in a porous medium under the influence of heat transfer and slip effects
- Mathematical modeling of torsional surface wave propagation in a non-homogeneous transverse isotropic elastic solid semi-infinite medium under a layer
- Curvilinear squeeze film bearing with porous wall lubricated by a Rabinowitsch fluid
- Essential factors for the changes in concrete during electrochemical extraction
- Natural frequencies of axisymmetric vibrations of thin hyperbolic circular plates with clamped edges
- Reversed Robin Hood Syndrome in the light of nonlinear model of cerebral circulation
- Mechanical parameters of the curvilinear squeeze film bearing lubricated by a Gecim-Winer fluid
- Identification damage model for thermomechanical degradation of ductile heterogeneous materials
- Comparative numerical analysis of different strengthening systems of historical brick arches
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22, number 3 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22, number 4 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22, number 1 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
| Nazwa wydania | Data |
|---|---|
| FEM and experimental analysis of thin-walled composite elements under compression | 2023-07-06 |
