Obiekt
Tytuł: Influence of multi extrusion die process on mechanical and chemical behavior of 2024-T3 alloy
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
In this paper, a cold multi-pass extrusion process for a 15mm in diameter solid 2024-T3 aluminum alloy rod was carried out using three dies to obtain three different diameters of 14mm, 13mm, and 12mm. The microstructure, hardness, and corrosion behavior were investigated before and after the extrusion process. ; Load-Displacement data were recorded during each extrusion process. The electrochemical corrosion test was made in a 3.5 wt.% NaCl solution using potentiostat instrument under static potentials test. Corrosion current was recorded to determine the corrosion rate for specimens. ; The results showed that the extrusion load increased with the number of extrusion passes, which is also seen in hardness test results. In addition, the corrosion rate decreased with the increase in the number of extrusion passes. This is due to severe plastic deformation, which generates a fine grain structure of (AlCu) and (AlCuMg) components.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 27, number 3 (2022)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Typy utworów > Artykuły
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME)
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2022)
Data ostatniej modyfikacji:
2023-07-06
Data dodania obiektu:
2023-02-03
Liczba wyświetleń treści obiektu:
49
Wszystkie dostępne wersje tego obiektu:
https://zbc.uz.zgora.pl/publication/77415
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 1 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 2 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 3 (2022)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 3 (2022) - spis treści
- System vibration control using linear quadratic regulator
- Roughness effects of textured surfaces in hydrodynamic lubrication
- Evaluation of velocity and acceleration effect on mecanum wheel robot positioning
- Chemically reacting Jeffrey fluid flow over a deformable porous layer with entropy generation analysis
- Application of reanalysis methods in structural mechanics
- Heat and mass transfer in a vertical channel flow through a porous medium in the presence of radiation
- A numerical approximation of 2D coupled Burgers` equation using modified cubic trigonometric B-spline differential quadrature method
- Development of dynamic load factors for human walking excitation for floor vibration design
- Radiation and magnetohydrodynamic effects on convective nanofluid past an inclined plate in the presence of a chemical reaction
- MHD free convective heat and mass transfer flow from a vertical porous surface with variable thermal conductivity, variable mass diffusivity and thermal diffusion including viscous dissipation and chemical reaction
- The Hall effect on MHD 2-fluid unsteady heat transfer flow of plasma in a rotating system via a straight channel between conducting plates
- Influence of multi extrusion die process on mechanical and chemical behavior of 2024-T3 alloy
- Tensile fault dislocation in an irregular-layered elastic half-space
- Investigations of couette flow unsteady radiative convective heat transfer in a vertical channel using the generalized method of lines (MOL)
- Testing of formed joints on a designed prototype station
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 4 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 1 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
| Nazwa wydania | Data |
|---|---|
| Influence of multi extrusion die process on mechanical and chemical behavior of 2024-T3 alloy | 2023-07-06 |
