Obiekt
Tytuł: Improvement friction welded 6063-T6 aluminum alloy joint properties
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
This study aims to investigate the effect of shot peening on the mechanical characteristics and microstructure of an aluminum alloy 6063 friction welded joints. 6063 bars with 12 mm diameters and 70 mm lengths were prepared; some of them were shot peened by steel balls (diameters 1.25 mm) for 15 minutes before the friction welding was carried out on a traditional lathe machine at 1200 rpm. X-ray radiography was used to identify the various internal defects like porosity, concavities, and cracks. ; The quality of each welded joint was evaluated by hardness test, microstructure analysis, X-ray diffraction, tensile test, and bending test. It was discovered that the fine grain structure of the aluminum alloy weld connection matrix results in a strong and reliable shot peening, contributing to improving the tensile and bending strength of weld joints with a percentage of 63.6% and 12.5%, respectively.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 29, number 4 (2024)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Typy utworów > Artykuły
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME)
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2024)
Data ostatniej modyfikacji:
2024-12-16
Data dodania obiektu:
2024-12-16
Liczba wyświetleń treści obiektu:
8
Wszystkie dostępne wersje tego obiektu:
https://zbc.uz.zgora.pl/publication/91591
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29, number 1 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29, number 2 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29, number 3 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29, number 4 (2024)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 29, number 4 (2024) - Contents
- An overview of heat sink technology
- Improvement friction welded 6063-T6 aluminum alloy joint properties
- Friction stir lap welding of dissimilar aluminum alloys with copper particles ?additives
- Intelligent systems model for selective laser melting (SLM) additive modeling of the damping of Ti-6Al-4v in turbulent flow during powder bed melting in the manufacturing process
- A practical alternative model to approximate a fully two dimensional thermally non-symmetric annular fin efficiency
- Optimisation of material composition in functionally graded plates using a structure-tuned deep neural network
- Effect of the inner cylinder endwall shape on the stability of Taylor-Couette flow
- Bending vibrations of a thin wing for a profile with two axes of symmetry
- Numerical study of turbulent separated flows in axisymmetric diffusers based on a two-fluid model
- Two-dimensional deformation of an elastic layer subjected to surface loads
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29, number 1 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
| Nazwa wydania | Data |
|---|---|
| Improvement friction welded 6063-T6 aluminum alloy joint properties | 2024-12-16 |
